5. The homogenizing head adopts a high-shear eddy current emulsification mixer, and the slow-speed scraping and stirring will automatically adhere to the bottom and wall of the pot. Material micronization. 6. The mixing structure adopts a fully welded method, the structure of the mixing pad is arranged at 45 degrees, and the joints are as far as possible to avoid the generation of a 90-degree angle, to avoid storage of materials, and to make cleaning more convenient. 7. A special type of frame-type wall scraping stirring device is adopted, and the stirring impact force is adjusted by a stepless frequency conversion speed regulator, and the speed can be adjusted arbitrarily within the speed range of 12-120 rpm. The steering turns clockwise from top to bottom, which can be adapted to the emulsification processing of various viscosity materials. 8. A special shearing emulsifying homogenizer is adopted, and the material is strongly sucked in by the high-speed rotating rotor, and the material is squeezed and sheared strongly. The homogenization device is installed in the center of the pot body, which can make the material roll naturally in the pot body to eliminate dead corners, so that the material can be homogenized with higher quality 9. The speed of the motor can be controlled by the frequency conversion governor through the frequency conversion speed regulation device to meet the stable speed and powerful torque 10. All functions such as heating, cooling, stirring, homogenization control buttons and temperature measuring instruments are concentrated on the control cabinet panel, which is convenient and reliable to operate 11. This machine is easy to operate, stable in performance, good in homogenization, high in production efficiency, easy to clean, reasonable in structure, small in area, and high in automation 12. Spiral ribbon scraping and mixing can make the product easier to mix, and the mixing efficiency is at least 2/3 higher than that of ordinary frame mixing; 13. The homogenizing head is processed by a high-precision machining center to ensure high precision and dynamic balance requirements. With the same energy input, it can produce a finer emulsion of 2~5μm than the traditional gear ring disperser; 14. The heat conduction medium in the jacket of the pot is heated by the electric heating tube to realize the heating of the material. 15. The cooling water can be connected to the jacket to cool the material 16. Operation Convenient and simple, with an insulation layer outside the mezzanine 17. Internal and external circulation homogenization form, higher homogenization efficiency. Save cycle time| Profile | Single layer tank | Double layer tank | Three layer tank |
| Tank material | SS304 or SS316L | ||
| Volume | up to 20T |
|
|
| Pressure | Vacuum-1Mpa | ||
| Structure | one layer | Inner layer+jacket | inner layer+jacket+insulation |
| Cooling method | No | ice water /cooling water | ice water /cooling water |
| heating method | NO | electric/steam heating | electric/steam heating |
| Agitator type | per customer requirement | ||
|
| speed 0--63 rpm | ||
| PARTS DETAILS
| half cover open | ||
| Various types of CIP cleaners | |||
| Sterile respirator | |||
| Inlet and Outlet sanitary valve | |||
| Inlet and Outlet sanitary valve | |||
|
| 7.Paddle blender .(According to customer requirements) | ||
|
| 9.Ladder | ||
| Model | capacity | Homogenizer motor | Agitator motor | Size MM (L*H*H) | ||
| kw | RPM | kw | RPM | |||
| ZT-200 | 200L | 3 | 0--3000 | 1.5 | 0-63 | 1500*2100*2700 |
| ZT-500 | 500L | 4 | 0--3000 | 2.2 | 0-63 | 1800*2200*2800 |
| ZT-1000 | 1000L | 5.5 | 0--3000 | 4 | 0-63 | 2200*2400*3000 |
| ZT-2000 | 2000L | 7.5 | 0--3000 | 5.5 | 0-63 | 2450*2650*3100 |
| ZT-3000 | 3000L | 11 | 0--3000 | 7.5 | 0-63 | 2650*2780*3200 |
| ZT-5000 | 5000L | 15 | 0--3000 | 11 | 0-63 | 2950*2950*3450 |
| Up to 20000 |
|
|
|
|
|
|
Skin care cream, shaving cream, shampoo, toothpaste, cold cream, sunscreen, facial cleanser, nutritional honey, detergent, shampoo, etc.
